If you would like to create a do it yourself PVC Wall Panels project, we hope this guide can facilitate. By going through this piece of article, you'll be able to do a step by step installation. It states everything you wish to grasp to put in your cladding and Trims. If you'd opt to have it professionally done, you'll need to hire a professional to do it for you.
Cutting the PVC Wall Panels to required measurements.
Panels may be simply cut or cut with the help of a hand saw, table saw, transportable buzz saw, jig saw or sharp utility knife. we suggest employing a toothed saw. The finer the teeth, the neater the cut you'll attain.
Starting the Installation process
Panels are usually mounted vertically i.e. from floor to ceiling, but panels can also be fitted horizontally if the shape of the area makes this a better choice. Similarly, ceiling panels can also run in either direction. Of course, you may have a preference on the approach you'd like according to your requirements.
Carefully fitting the measured and cut pieces of PVC Panels:
Decorative plastic panels are simply mounted to virtually every surface. counting on the kind of wall or ceiling you'll select different types of fitting.
Nailing of the PVC Wall Panels for reliability
Apply nails equally and level within the panel lip. take care to not hit the panel with the hammer. This methodology solely applies once fixing the cladding to a wooden surface or battening. make certain the battening is flat and level, packing out wherever necessary on uneven walls in order that once applied the cladding
Fixing wall panels with screws
Apply screws through the panel lip. Screw fixing is often made to wood wall studs. but breezeblock, brick or gypsum board would require the wall to be plugged before screwing. once the first plank is mounted in place following conceals the previous fixing.
Stapling as another alternate for nails and screws:
You can use stainless-steel staples for fixing panels to plaster or wood wall studs. This technique is especially appropriate once using wall studs. Perpetually check that your wall studs are flat and level. Packing them out wherever necessary on uneven walls, can stop the panels from developing an unwanted curvature.
Gluing PVC Panels to walls as the most preferred method:
This is the tactics most liked by PVC Wall Panel installers but you'll only use adhesive when applied to a dry, even wall. The wall should be freed from any greasy substances and mud. Only use specified or recommended adhesive. This is one of the strategies aimed to reduce the utilization of trims and attain incredibly neat and professional finish.
We hope that this piece of article has helped you. If you require more assistance, please don't hesitate to contact us via our email or contact form on our website, where we will get back to you as soon as possible.
If you want to know more on the same topic you can visit this website. These are experts in the field of your interest. They can help you further. Madaan Aluminium And Decoration
Comments
Post a Comment